Panasonic ER1410 - Parts Identification; Charging and AC Operation; Charging with Charging Stand

3
English
Parts identification
3
mm
6
mm
9
mm
12
mm
15
mm
18
mm
A B
C
G
F
H



  6
7
D
E
I
:
;
J
K
8
9
A Main body
 0·CHARGE/1 switch
 Charge status ( )
lamp
 Appliance socket
B Blade
 Mounting hook
 Cleaning lever
6 Moving blade
7 Stationary blade
C 3 mm/6 mm comb attachment
D 9 mm/12 mm comb attachment
E 15 mm/18 mm comb attachment
F AC adaptor (RE5-95)
8 Power cord
9 Appliance plug
G Cleaning brush
H Oil
I Charging stand ER1420
: Charging plug
; Socket
J Comb attachment shelf
ER1420
K Connector ER1420
Charging the hair clipper
Charge
Charge the clipper when charge status ( ) lamp starts to blink.
It can be used for approximately 5 minutes after the charge status
( ) lamp blinks.
Charging with the charging stand
ER1420
1
1
Connect the power
cord to the charging
stand.
2
2
Slide the 0·CHARGE/1
switch to “0·CHARGE”.
3
3
Place the clipper on
the charging stand and
plug in the adaptor
into a household
outlet.
Charge status ( ) lamp glows in red and charging starts.
Charging is completed when Charge status ( ) lamp
blinks in red once every second. (Max. 1 hour later)
10 minutes after charging is completed, the charge status
( ) lamp blinks in red once every 2 seconds.
1 full charge will provide approximately 80 minutes of
continuous operation.

•
•
•
•
ER1420_EU.indb 3 2007/12/11 16:22:48