Storing and charging the trimmer
Store
Place the trimmer on the charger when storing or charging it.
You can fully charge the trimmer in 8 hours if it is losing speed.
The oil and the cleaning brush also can be placed on their stands.
1. Pass the power cord through one of the
cord guides on the right or left.
2. Plug the power cord into a household
outlet and place the charger on a flat
surface.
3. Turn off the trimmer and insert it in the
charger as illustrated.
The charge indicator lamp lights and stays
on until the trimmer is removed from the
charger.
A full charge supplies enough power for
approximately 10 trims (5 minutes per trim
for a normal beard).
Charge the trimmer for at least 16 hours
when charging it for the first time or when it
has not been used for more than 6 months.
If the shape of the plug does not fit the
power outlet, use an attachment plug
adaptor of the proper configuration.
•
•
•
•
Fixing the charger to the wall
1. Attach two screws to the wall
as illustrated.
Screws are sold separately.•
2. Hook the charger onto these screws.
3. Plug the power cord into a household outlet.
Using the trimmer
Use
Trimming your moustache
1. Apply a few drops of the oil to the
blades.
2. Grasp the sides of the comb
attachment and move it to the
desired trimming length (between
3 mm and 15 mm).
Indicator Trimming length
3 3 mm
6 6 mm
9 9 mm
12 12 mm
15 15 mm
3. Slide the switch on the main body upwards to turn on
the trimmer.
To Next Page
Loading...
