Panasonic ES-EL8A

16
English
1
1
Attach the foot care head [
H
].
• Push down rmly until you hear a “click”.
2
2
Select the mode by pressing the
power switch [
I

].
• POWER mode is recommended for
rotation speed.
( Page 13)
3
3
Bring the foot care head into contact with the
skin, and begin ling.
The basics of foot care
Do not use the product for ling anything
other than calluses and hardened skin on
the feet.
<Use on>
Callus
ף
ס
ע
A callus is a hardened layer that forms
through repeated pressure or abrasion.
Hardened layer
Epidermis
Derma
Things to be careful of when ling
• Filing too large an area can result in even larger calluses
forming.
Therefore, be sure to leave some of the hardened layer.
Before use After use
Hardened layer
Epidermis
Derma
Portion to be
removed
Leave some of the
hardened layer
ץ
ף
ע
ס
פ
• Filing a single location for a long time can cause it to become
hot with friction.
To avoid this, be sure to make small changes in the ling
position while ling.
• Filing an area too deeply can cause it to become sore or
inamed.
• Filing should be performed about once every two weeks.
Tips for moving the foot care head
Move in the direction indicated by the arrows.
Use your free hand to support ling.
PB015825 - EL8A-3A�������_01EN_03-22-18.indd 16 2018/3/6 11:39:31