Storing the shaver
Store the shaver in a place with low humidity after use.
Do not store the shaver where it will be exposed to direct
sunlight or other heat sources.
Disconnect the power cord when storing the shaver.
Do not bend the power cord or wrap it around the shaver.
Parts identification
A Protective cap
B Outer foil section
1 Foil frame
2 System outer foil
3 System outer foil release
buttons
C Inner blades
D Main body
4 Foil frame release buttons
5 Pivot action selector
6 Lock ring
7 Battery capacity lamp
8 Charge status lamp ( )
9 Appliance socket
•
•
•
•
: P
ower switch [0/1]
; Thumb rest
< Trimmer
= Trimmer handle
E AC adaptor (RE7‑59)
> Power cord
Appliance plug
F Travel case
Using the lock ring
Use the lock ring to lock or unlock the power switch.
Rotate the lock ring until it clicks.
Rotate the lock ring to “ ” to unlock the power
switch:
For when shaving, washing the shaver, lubricating
the shaver.
Rotate the lock ring to “ ” to lock the power
switch:
For when carrying the shaver.
Charge
Charging the shaver
1
1
Insert the appliance plug into the
shaver.
2
2
Plug in the AC adaptor into a
household outlet.
Turn the shaver off before attaching.
Charging is completed after approx. 1 hour.
If the shape of the plug does not fit the power outlet, use an
attachment plug adaptor of the proper configuration.
You cannot operate the shaver while charging.
•
•
•
To Next Page
Loading...
