23
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
Problem Action
The blades are not dry
or are sticky.
The blades may not dry quickly
due to temperature conditions.
Run the “Dry/Charge” mode
again or wipe with a soft cloth
before shaving.
The blades crack or
deform during cleaning.
Do not insert any foreign
objects into the recharger.
Replace the system outer foil
and/or inner blades.
(See page 20.)
The cleaning liquid has
foamed.
If you mix soapy water or hand
soap with the detergent or use
another detergent, the cleaning
liquid will foam. Use the self‑
cleaning recharger after
thoroughly washing and drying
the shaver.
Replace the cleaning liquid.
Cleaning liquid leaked
from the cleaning liquid
unit.
Do not press the cleaning liquid
unit removal button during the
mode.
Place the self‑cleaning
recharger horizontally.
If you use the self‑cleaning
recharger when the shaver is
wet or when soap or shaving
gel is on the shaver, cleaning
liquid may leak.
►Shaver
Problem Action
Trimmed hairs fly all
over.
This can be improved by
cleaning every time after
shaving.
Clean the inner blades with the
brush.
Apply oil after cleaning with
water and leaving to dry
thoroughly.
System outer foil gets
hot.
Apply oil.
(See page 19.)
Replace the system outer foil if
it is damaged or deformed.
(See page 20.)
The power switch cannot
be pressed.
Unlock the power switch.
Operating time is short
even after charging.
Apply oil.
When the number of operations
per charge starts to decrease,
the battery is nearing the end of
its life.
ES-LV95_EU.indb 23 2013/07/04 18:43:14
To Next Page
Loading...
