25
TR RO H SK CZ PL FIN S N P DK E NL I F D GB
Problem Action
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 19.)
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
The shaver cannot be
charged with the self‑
cleaning recharger.
Gently wipe the main body rear
terminals and the charging
terminals of the self‑cleaning
recharger with a cloth or tissue
dampened with water.
Shaver stopped
functioning.
Recommended ambient
temperature for operation is
5 – 35 °C. The shaver may stop
functioning when out of
recommended ambient
temperature range.
The battery has reached the
end of its life.
Problem Action
The driving sound
changes while shaving.
While the shaving sensor lamp
glows, the shaving sensor is
operating. The sound changes
depending on the beard
thickness.
The power will not
switch to OFF.
Press the power switch twice
while using in the shaving
sensor mode.
►When the STATUS lamp glows
Problem Action
It is time to replace the
cleaning liquid.
Pour new water and detergent
into the cleaning liquid unit.
The cleaning liquid unit
is not properly attached.
Properly attach the cleaning
liquid unit.
The self‑cleaning
recharger is tilted.
Place the self‑cleaning recharger
on a horizontal surface.
Use the self‑cleaning
recharger outside the
range of the
recommended usage
temperature.
Use within the recommended
temperature range of
15 – 35 °C.
After performing the above operation, press the SELECT
button and select a mode.
►When all self-cleaning recharger’s lamps blink
Problem Action
Device failure
Contact an authorized service
centre.
ES-LV95_EU.indb 25 2013/07/04 18:43:14
To Next Page
Loading...
