Panasonic ES-LV9C - Page 13

13
English
• The sonic vibration cleaning mode is activated when the power
switch is pressed for more than 2 seconds while the shaver is
not operating. (See page 14.)
You cannot shave in this mode.
►Cord shaving
If you insert the appliance plug to the shaver and plug the adaptor
into a household outlet, you can use it even if the battery capacity
is low.
• The battery will be consumed even when using the shaver with
the AC adaptor.
• If the shaver does not work, continue charging it for approx. 1 minute.
►Switching the shaver head
You can change the pivot action.
FREE
The shaver head is moved to prevent
missed spots.
LOCK
You can lock the shaver head.
LOCK
FREE
►Using the trimmer
1. Slide the trimmer handle up to the
“ ” position so that the trimmer
stands upright.
2. Press and use.
FREE
LOCK
Press and hold the top knob (a) and
slide the trimmer handle down to lower
the trimmer.
FREE
LOCK

Tips for better usage
Apply the trimmer edge perpendicular to skin gently and move
downward slowly.
Trimming sideburns Pre‑shave of long beards
Cleaning, drying, charging
We recommend cleaning the shaver after each use.
1
Insert the shaver into the
self-cleaning recharger and
plug the adaptor into a
household outlet�
(See page 10�)
• Check that the charge status lamp
( ) is glowing.
• When the LOW lamp or the STATUS
lamp lights up, see page 18.
1
2
1
2
Press �
The CLEAN lamp and the DRY lamp glow, and the “AUTO”
mode will start after approximately 6 seconds.
ES-LV9C_ASIA.indb 13 2017/09/08 15:21:57