Panasonic ES2045 - Further Useful Tips; Optimizing Epilation and Skin Care; Cleaning Your Epilator; Washing the Epilator Heads

in the shaver head) to avoid
damaging the outer foil.
* Before using the appliance for the
first time, wipe away excess oil
with a tissue, etc. to avoid getting
the oil on the outer blade and your
skin.
Further useful tips
* In the beginning, it is advisable to
epilate in the evening so that any
possible reddening can disappear
overnight. When you feel pain or
rash appears, cool the skin with
cold towel.
Hair is easier to remove after
bathing or showering.
lt may happen that new grown
fine hairs do not manage to get
through to the skin surface. In
order to prevent the risk of
ingrown hairs, we recommend the
regular use of massage sponges,
e.g. after showering, or exfoliation
peelings.
By gentle scrubbing action, the
upper skin layer will be removed
and fine hairs can get through to
the skin surface.
Cleaning
Switch off and unplug the appliance
before cleaning.
Washing your epilator
After using the appliance, always
clean the frames and discs to keep
them in a hygienic state.
12
To avoid serious
A Warning! personal injury:
* Always unplug the charger from
the electrical outlet and from
the epilator before cleaning the
appliance.
* Never use the charger in the bath
or shower.
* Never wash or place the charger
in water.
A Caution!
* Make sure that no hair or clothing
comes into contact with the discs
and never attempt to touch them.
Failure to do so can result in them
becoming entangled in the discs.
The epilation and shaver heads and
main body can be washed.
We recommend washing each head.
Take care not to deform or damage
the skin protector during cleaning.
Cleaning with liquid hand soap is
unnecessary when liquid body soap
is used for hair removal. Rinse off
soapsuds and dry after use.
* Remove the frame by holding
down the frame release button
and placing your fingers on the
tabs on the front and back of the
head. (Fig. 6)
Take care not to touch the skin
protector as it can easily become
deformed.
In the case of the shaver head,
remove the frame by grasping the
edge of one side with the fingers.
(Fig. 9)
Apply conventional liquid hand
soap to the discs and blade.
* Turn the switch on and then pour