Panasonic ET-LAX100 User Manual

Replacement Instructions
Lamp unit for LCD Projector
Model No. ET-LAX100
Read these instructions completely before replacement.
TQZH 786-1
R
Information on Disposal for Users of Waste Electrical & Electronic
Equipment (private households)
This symbol on the products and/or accompanying documents
means that used electrical and electronic products should not be
mixed with general household waste.
For proper treatment, recovery and recycling, please take these
products to designated collection points, where they will be
accepted on a free of charge basis. Alternatively, in some
countries you may be able to return your products to your local retailer upon
the purchase of an equivalent new product.
Disposing of this product correctly will help to save valuable resources and
prevent any potential negative effects on human health and the environment
which could otherwise arise from inappropriate waste handling. Please
contact your local authority for further details of your nearest designated
collection point.
Penalties may be applicable for incorrect disposal of this waste, in
accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact
your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or
dealer and ask for the correct method of disposal.
p05-12(LAX100)enfr07.4.1617:06ページ1

Panasonic ET-LAX100 Specifications

General

Product Type	Projector lamp
Lamp Life (Normal)	2000 hours
Warranty	90 days
Weight	0.5 kg
Type	UHM
Function	Replacement Lamp
Lamp Life (Economic)	3000 hours

Summary

Safety Precautions and Notes

General Safety Warnings

Lamp unit replacement requires a qualified technician. Allow unit to cool before handling.

Notes on Lamp Unit Replacement

Handle glass lamp carefully to prevent breakage. Dispose of old lamp like fluorescent. Phillips screwdriver needed.

Lamp Unit Replacement Procedure

Cooling and Initial Removal

Ensure lamp unit has cooled. Remove lamp unit cover by unscrewing fixing screws.

Lamp Unit Extraction

Loosen lamp unit fixing screws, then gently pull out the lamp unit using the handle.

New Lamp Unit Installation

Insert new lamp unit correctly and tighten fixing screws securely. Ensure cover is also secure.

Power-Up and Menu Navigation

Connect power, turn on main power, then projector power. Navigate menu to 'OPTION'.

Lamp Runtime Reset and Accessory Replacement

Resetting Lamp Runtime

Select 'LAMP RUNTIME' from OPTION menu, then press ENTER to reset to zero.

Air Filter Replacement

Replace the air filter with the new accessory as supplied, following operating instructions.