3. Turn the on/off switch to “on”
position to turn on the
toothbrush.
4
. When you have finished
brushing, turn the on/off
switch to “off” position to turn
off the power.
To prevent foam from
spattering, turn the
toothbrush off before
removing it from your mouth.
Strong pressure
preventive function
Pressing the brush bristles too
hard against your teeth will
activate this feature, causing the
intensity of the vibration to be
weakened automatically as a
safeguard against excessive
pressure.
PRECAUTION:
When you first begin using the
toothbrush, you may
experience slight bleeding of
the gums even though your
gums may be healthy. This is
because your gums are
receiving stimulation by the
toothbrush for the first time.
The bleeding should stop after
one or two weeks of use.
Bleeding that persists for more
than two weeks may be an
indication of an abnormal
•
•
condition of your gums, such
as pyorrhea. In this case, stop
using the toothbrush and
consult your dentist.
Do not allow hair products (e.
g., gel or oil) or hand lotion to
come in contact with the unit as
they may damage its surface.
NOTE:
Replacing the brush head every
3 months is recommended.
If the bristles are bent to one
side, the toothbrush is not very
effective for brushing. Replace
the brush with a new one when
the bristles are bent or worn.
TIPS ON USAGE
V-Shaped Brush
Brush carefully between teeth
or around teeth that are not
str
aight. (Fig. 6)
Place the bristles of the
toothbrush gently against your
teeth.
Front teeth, and between teeth
and gums:
Place the br
istles at 45°.
(Fig. 7
)
Brush the chewing surface of
teeth:
Br
ush at a 90° angle. (Fig. 8)
Brush the back of teeth or
•
•
•
To Next Page
Loading...
