Panasonic EY7440-U1 - Switch and Wiring Attachment

Ref. No. 2F Procedure 2A →
→→
→ 2B →
→→
→ 2C→
→→
→ 2D→
→→
→ 2E→
→→
→ 2F Attachment of the Switch.
1. Insert the connectors into battery terminal and control PCB.
NOTE :
Do not connect (+) and (-) terminal wrongly.
Apply the grease (FLOIL) on the places where insert into the
connectors.
7
EY7440-U1 /