Panasonic F10 MARK II - Page 24

10.
Confirm
that
the
Iris
Close/Auto/Open
Adjustment
(9)
is
12.
set to the center detent position.
When the AWC position of the White Balance Selection
Switch (5) is selected, push the White Balance Set Switch
(2) (WHITE BALANCE) approximately 2 second to set the
AUTO
IRIS
white
balance
while
aiming
the
camera
at
a
white
object.
CLOSE OPEN
MC )\ WHITE
BALANCE
© Push oO SeT
a1,
AWC
Set the White Balance Selection Switch (5) (ATW/AWC) to
the ATW position for normal condition or AWC position
for limited condition.
ATW
WHITE
BALANCE
‘e) ser 13. Adjust the zoom with the Power Zoom Contro! (40) or
Zoom Lever to have the desired picture composition.
AWC
14. For Macro Operation
A Set the focus ring to infinity and set the zoom/macro ring
H to MACRO for enlarged close up pictures at a distance of
' ATW up to 5cm.
Set the zoom/macro
ring to macro
_~19—