Panasonic F10 MARK II - Page 34

(2)
(3)
Recording Display
When the VTR Start/Pause Button (55) on the grip should-
er or on the camera remote controller is pressed, the
blinking REC is displayed for indicating recording mode.
(a)
When the VTR Start/Pause Button (55) on the grip should-
er or on the camera remote controller is pressed while the
Strobe Effect Shutter Switch is set to SES position, the
blinking SES and REC are displayed alternately for indicat-
ing recording with strobe effect shutter mode.
“SEE “REE
Fade-in/out Operating Display
When the Fade-in/out Button (43) on the grip shoulder or
on the camera remote controller is pressed for the fade-in/
out operation, the letter F is displayed.
(b)
Fade-in Operation
When the VTR Start/Pause Button (55) on the grip should-
er or on the camera remote controller is pressed after the
Fade-in/out Button (43) on the grip shoulder or on the
camera remote controller is pressed, the blinking REC and
F are displayed for fade-in operation.
When the fade-in operation is completed, the letter F dis-
appears.
Fade-out Operation
When the Fade-in/out Button (43) is pressed during record-
ing, the blinking REC and F are displayed for ready of
fade-out operation.