Panasonic FP Series - Page 1291

Appendix Programming Information
1290
No.
Name Default Values
400 High-speed counter:
Channel 0
Unused  Two-phase input (X0, X1)
 Two-phase input (X0, X1), Reset input (X2)
 Incremental input (X0)
 Incremental input (X0), Reset input (X2)
 Decremental input (X0)
 Decremental input (X0), Reset input (X2)
 Incremental input (X0), Decremental input (X1)
 Incremental input (X0), Decremental input (X1), Reset input (X2)
 Counter input (X0), Incremental/decremental control input (X1)
 Counter input (X0), Incremental/decremental control input (X1),
Reset input (X2)
400 High-speed counter:
Channel 1
Unused  Incremental input (X1)
 Incremental input (X1), Reset input (X2)
 Decremental input (X1)
 Decremental input (X1), Reset input (X2)
400 High-speed counter:
Channel 2
Unused  Two-phase input (X3, X4)
 Two-phase input (X3, X4), Reset input (X5)
 Incremental input (X3)
 Incremental input (X3), Reset input (X5)
 Decremental input (X3)
 Decremental input (X3), Reset input (X5)
 Incremental input (X3), Decremental input (X4)
 Incremental input (X3), Decremental input (X4), Reset input (X5)
 Counter input (X3), Incremental/decremental control input (X4)
 Counter input (X3), Incremental/decremental control input (X4),
Reset input X5)
400 High-speed counter:
Channel 3
Unused  Incremental input (X4)
 Incremental input (X4), Reset input (X5)
 Decremental input (X4)
 Decremental input (X4), Reset input (X5)
401 High-speed counter:
Channel 4
Unused  Two-phase input (X6, X7)
 Incremental input (X6)
 Decremental input (X6)
 Incremental input (X6), Decremental input (X7)
 Counter input (X6), Incremental/decremental control input (X7)
401 High-speed counter:
Channel 5
Unused  Incremental input (X7)
 Decremental input (X7)
402 Pulse output:
Channel 0 (transistor
types only)
Unused  Pulse output (Y0, Y1)
 Pulse output (Y0, Y1), Home input (X4)
 Pulse output (Y0, Y1), Home input (X4), Position control trigger
input (X0)
 PWM output (Y0)
402 Pulse output:
Channel 1 (transistor
types only)
Unused  Pulse output (Y2, Y3)
 Pulse output (Y2, Y3), Home input (X5)
 Pulse output (Y2, Y3), Home input (X5), Position control trigger
input (X1)
 PWM output (Y2)