Panasonic FP0H - Comparison of Pulse Output Function

Table of contents
2-14
2.1 Solution for Each Error Message
1) Error message (Connection error)
Solution
- Check if the USB port settings are correct. (Select the correct USB port.)
- Check if the USB and power supply connection cables are securely inserted.
- Check if the FP0H is powered on.
- Check if the connected PLC type is FP0H.
2) Error message (Connection error)
Solution
- The USB port is used by another communication software (FPWIN GR/GR7/Pro or
HyperTerminal).
- Set it to offline or exit it.