Panasonic FV-0810VSS1 - Replace Led Unit Method; Parts Identification

Remove the hexagon nut,Then
take out the undee washer,
blade fix ring,blade and blade
plate
Step 10.
Replace the motor assy
Remove 3pcs screws
Remove 8pcs screws,Then take
out the casing from casing unit
Step 11. Step 12.
Step 13. Step 14.
2. Parts Identification
13
Replace Motor Assy Method
(Only for FV-0510VSCL1 reference)
()Clamp
Pull out the humidity sensor lead
from casing clamp,Then take out
the PCB assy unit form casing unit
Replace Led Unit Method
Step 1. Step 2. Step 3.
Cut the binder
Remove 1pc screw,Then take
out the led unit from louver assy
Pull out the Led unit lead from
louver assy
()Clamp
()binder