The date and time are incorrect.
Make the correct settings.
1.
Touch (Settings) - [Time & Language] - [Date & time], and check [Off] in “Set
time automatically”.
2. Touch [Change], and then set the day and time.
If the problem persists, the internal clock battery may need to be replaced. Contact Panasonic
Technical Support.
<Only for modelwith LAN>
When the computer is connected to LAN, check the date and time of the server.
The 2100 A.D. or later year will not be correctly recognized on thiscomputer.
Battery indicator blinking green. In order to stop the batteryfrom deteriorating, power supply from AC adaptor has been shut off, and the
battery power isbeing consumed. Do not remove the battery pack in this status.
“Executing Battery Recalibration” screen
appears.
The Battery Recalibration was cancelled before Windows wasshut down last time. To start up Windows,
turn off the computer by the power switch , and then turn on.
Other startup problems.
Start in the Setup Utility ( Setup Utility) to return the Setup Utility settings (excluding the pass-
words) to the default values. Start the Setup Utility and make the settings again.
Remove allperipheral devices.
Check to see if there was a diskerror.
1. Remove allperipheral devices including an external display.
2.
Touch (All apps) - [Windows System] - [This PC].
3. Touch and hold [Windows (C:)], and touch [Properties].
4. Touch [Tools] - [Check].
A standard user needs to enter an administrator password.
5. Follow the on-screen instructions.
Entering Password
Even after entering the password, pass-
word input screen isdisplayed again.
<Only if the external keyboard isconnected>
The computer may be in ten-key mode.
When Num Lock is on, press ≪ Num Lock≫ to disable the ten-key mode, and then input.
The computer may be in Caps Lock mode.
When Caps Lock ison, press≪ Caps Lock≫ to disable the Caps Lockmode, and then input.
Enter the password using the same keyboard that was used to set the administrator password
or user password, asthe key layoutsof the on-screen keyboard and some external keyboards
may differ.
Forgot the password.
Supervisor Password or User Password:
Contact Panasonic Technical Support.
Administrator password:
If you have a password reset disk, you can reset the administrator password. Set the
diskand enter anywrong password, then follow the on-screen instructions and set a
new password.
If you do not have a password reset disk, reinstall ( Installing Software) and set up
Windows, and then set a new password.
Shut Down
Cannot turn off the computer.
Remove allperipherals.
It may take 1 or 2 minutes to turn off the computer.
- 112 -
To Next Page
Loading...
