Hardware Diagnostics
If it appears that the hardware installed in this computer isnot operating properly, you can use the PC-Diagnostic Utility to determine whether or not there
is a problem.
If the utility discovers a problem in the hardware, contact PanasonicTechnicalSupport.
Software cannot be checked using this utility.
N O T E
n Alternatively, you can operate with an external keyboard.
Hardware that can be checked using the PC-Diagnostic Utility
CPU/System
RAM XXXX MB
Storage XXX GB
<Only for FZ-M1J-series models>
Sound
*1
USB
SD (Only for model with microSD Card Slot)
Touch Screen
Wireless LAN (Only for model with wireless LAN)
Video
<Only for FZ-M1J-series models>
Serial Port (Only for model with serial port)
<Only for FZ-M1G-series models>
Wireless WAN (Only for model with wireless WAN)
Bluetooth (Only for model with Bluetooth)
GPS (Only for modelwith dedicated GPS)
*1 : When the PC-Diagnostic Utilityis running a loud beep willsound, so do not use headphones as this time. (The beep will not sound if mute is using in
Windows or [Sound] is turned off in [Concealed Mode Configuration].)
N O T E
n When the video diagnostic check is running, the display may be distorted. This is not malfunction.
Regarding the PC-Diagnostic Utility
Operations
Touch screen / External mouse oper-
ations
External keyboard operations
Select icon Place the cursor above the icon
Press ≪ →≫ ≪ ←≫ ≪ ↑≫ ≪ ↓≫ ( (close) cannot
be selected)
Touch the icon Touch or click (Right-clickcannot be used) Press ≪ Space≫ above the icon
Complete the PC-DiagnosticUtility and
then restart the computer
Touch or click (close)
Press ≪ Ctrl≫ + ≪ Alt≫ + ≪ Del≫
- 121 -
To Next Page
Loading...
