The computer will restart.
8. Touch [Recovery].
9. At the confirmation message, touch [Accept.].
10. Confirm the contents of “EULA”, and touch [Accept] if you continue.
11. Touch [Disk 0].
12. Touch [Recovery ALL Partitions.].
13. Touch [Remain Recovery Partition.].
Follow the on-screen instructions.
14. When the Ending process screen is displayed, remove the Recovery Disc and commercially available optical drive and then touch
[Reboot].
Follow the on-screen instructions.
15. On the “Finish Recovery Process.” screen, touch [Shutdown.].
16. Turn on the computer.
17.
Perform Setup Windows (
OPERATING INSTRUCTIONS - Read Me First
).
18. Start the Setup Utility and change the settings as necessary.
19. <Only for model with TPM> Clear TPM.
1.
Touch and hold (Start) at the bottom left corner.
2. Touch [Run], then input “tpm.msc” and touch [OK].
3. Touch [Clear TPM] under “Actions” on the right of the “Trusted Platform Module (TPM) Management on Local Computer” screen.
4. Touch [Restart] of the “Manage the TPM security hardware” screen.
TPM is cleared, and the computer will restart.
- 127 -
To Next Page
Loading...
