Panasonic FZ-M1 Series - Touch Screen Mode

Drag Touch an object (file, icon, etc.) and drag your finger to the desired location
before removing it to move the object.
Swipe Touch with a sweeping motion.
Flick Touch with a quick sweeping motion.
CAUTION
n Touch the screen with your fingers or the dedicated pen (optional).
When touching the screen, use only your fingersor the dedicated pen (optional) on the surface.
Touching the screen with objects(e.g. fingernail, metallic object, or other hard or sharp objects) other than specified may scar or stain the sur-
face, causing malfunction.
n Do not apply too much pressure when operating the screen.
Only a light touch is required to operate the screen. Applying too much pressure may damage the surface.
n Do not operate the computer when such things as dust are on the screen.
Do not allow contact with substances that could dirty the screen, such as oil.
Touch Screen Mode
You can select the suitable operation mode in Touch Screen Mode.
1.
Touch (Panasonic PC Settings Utility) - (Settings) - (Touch Screen).
2. Select the operation mode under “Touch Screen Mode”.
[Pen] mode
Suitable for the dedicated pen (optional) operation.
Use thismode when not operating with finger.
Using this mode maycause accidentalresponse to metal objectsclose to the screen.
Unless you have the dedicated pen (optional), operation will not be possible.
[Pen/Touch] mode
Use thismode when using both finger and the dedicated pen (optional).
If both the dedicated pen (optional) and finger touch the screen at the same time, the dedicated pen (optional) operation takes priority.
Using this mode maycause accidentalresponse to metal objectsclose to the screen.
[Touch] mode
Suitable for finger operation.
Use thismode when not operating with the dedicated pen (optional).
[Touch (Glove)] mode
Use thismode when operating with a glove on.
Depending on the type of glove, operation may be ignored.
With finger operation, the screen may not respond properly.
[Touch (Water)] mode
Use thismode when the screen or finger iswet with water drops in operation.
Depending on the water drop condition, operation may be ignored.
3. Select the “Windows button in Touch (Water)”.
- 18 -