Panasonic FZ-M1 Series - Page 48

5. Input detailed information such as APN, and then touch [Save].
6. Touch [OK].
Internet connection will be possible.
7. If you are not connected to the Internet, select created APN profile, and then touch [Apply].
N O T E
n When “Use cellular instead of Wi-Fi” is set to [When Wi-Fi is poor] (default), wireless WAN connections will be established only when
there is no Internet connection via Wi-Fi.
n
When using wireless WAN, perform the following to disable Airplane mode
*1
.
1.
Touch (Settings) - [Network & Internet] - [Airplane mode]
*1
.
2.
Set “Airplane mode”
*1
to [Off].
3. Set “Cellular” to [On].
*1 : Screen messages are explained in [English (United States)].
(Depending on the language preference, some screen messages in these instructions are different from the actual screen messages. For
example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference.)
Disconnecting to a network
1.
Touch (Settings) - [Network & Internet] - [Cellular].
2. Touch [Disconnect].
N O T E
- 48 -