Panasonic FZ-M1 Series - Advanced Security Features

Embedded Security(TPM)
Only for model that supports TPM.
Can be changed only when [Set Supervisor Password] is set.
Sub-menu items:
Sub-Menu Protection
TPM State (Depending on the models, this item is not displayed.)
Pending TPM operation
When [Clear TPM Owner] isselected, clear owner information in the
TPM chip.
Use for discarding and transferring this product.
If you select [Clear TPM Owner] when the BitLocker iseffective, you
may need to reinstallOS.
Current TPM Status Information (Depending on the models, this item is
not displayed.)
Enter the sub-menu.
<Only for FZ-M1J-series models>
AMT Configuration
Only for model that supports Intel(R) AMT.
Can be changed only when [Set Supervisor Password] is set.
Enter the sub-menu.
Secure Boot
The sub-menu appears when this item is selected.
If you change factorydefault setting, preinstalled-OS maynot operate correctly.
Enter the sub-menu.
Exit Menu
Save Values and Reboot To reboot the system after saving the changes.
Reboot Without Saving Changes To reboot the system without saving the changes.
Save Options
Save Current Values To save the changes for allSetup options.
Load Previous Values To load previous values for all Setup options.
Load Default Values To return the settingsto the default values.
Boot Override
Windows Boot Manager Boot from preinstalled OS.
Recovery Partition Erase your flash memory or restore the computer to its original factory default image.
Windows Recovery Environment Boot from Windows Recovery Environment.
Depending on the hardware constructions, some device names are different.
Diagnostic Utility
Execute DiagnosticUtility.
- 67 -