Smart Card
<Only for model with Smart Card slot>
You need software to use a Smart Card.
CAUTION
n Do not:
Hit, bend, or drop the card.
Touch the contact part with fingers or metalobject.
Place the card in veryhot location for a long time.
Remove the card immediately after inserting it.
Inserting/Removing the Smart Card
To insert the card
1. Slide the cover (A).
2. Open the cover (A) and insert the Smart Card (B) to the slot with the contact part (C) located on the back side.
Insert the card until it securely fitsinto the slot.
3. Close the cover (A).
CAUTION
n The card stops halfway. Do not push the card forcibly furthermore.
- 75 -
To Next Page
Loading...
