Panasonic FZ-M1 Series - Using Software

Codablock A, Codablock F, Code 11, Code 128 French CIP, EAN 128 Irregular, ISBT, Code 93, EAN.UCC Composite CC-A/B, EAN.UCC
Composite CC-C, EAN.UCC Composite Linear, ISBN, ISMN, ISSN, Matrix, Maxicode, MicroPDF417, MSI, Plessey, Standard 2 of 5, Telepen,
UPC-E1, TLC 39, Australian Post, BPO, Dutch Post, Japan Post, Planet, Postnet, Canada Post, Infomail, Sweden Post
Using Software
Barcode Setting Utility
Barcode Setting Utilityapplies the barcode configuration file (*.INI file) to the Barcode Key Emulator or Barcode Reader module.
Barcode Configuration Utility
Using the Barcode Configuration Utility, you can create and perform the configuration files to set up the settings.
1. Sign in to Windows as an administrator.
2.
Touch (Panasonic PC Settings Utility) - (Utilities) - [Barcode Configuration].
If the “User Account Control” screen appears, touch [Yes].
If you want to reflect/create a barcode configuration file, touch [Barcode Configuration Utility].
3. Touch target model, and then touch [OK].
Usually choose [2D Barcode Reader Type B Series].
4. Make necessary setting.
If you want to set the type of symbology (type of barcode)
1. Touch [Symbology Configuration] tab.
2. To deploythe symbologyyou want to set.
3. Select [Disable] or [Enable] in [ACTIVATE].
If you can set up a data editing function of barcode reader
1. Touch [Data configuration] tab.
2. Make necessarysettings.
You can specifythe setting contents using the edit boxesand pull-down lists for each setting item.
Revert to the factory default state of the machine settings
1. Touch [Set Baseline Settings] button on each tab.
2. At the confirmation message, select [Yes].
N O T E
n In each setting tab, onlyitems that need to be set, please put a check in the check box. If you do not want to change any settings, please
do not put it in check.
<For Barcode Key Emulator (optional)>
n [Barcode Software Tool] tab is added on the Barcode Configuration Utility for Barcode Key Emulator.
5. Create and reflect the barcode configuration file.
When creating a barcode configuration file
1. Touch [File] - [Save as].
2. Save the barcode configuration file.
Barcode Configuration file (that created by the Barcode Configuration Utility) can be reflected in the barcode reader module bydrag-
ging and dropping to the Barcode Setting Utility ( Direct application of the barcode configuration file)
When creating and reflecting the barcode configuration file
- 81 -