4. Close the Nano SIM card slot ( ), and slide it in the direction of the arrow ( ) until you hear a click.
• To remove a SIM card, follow the same procedure, and then pull out the SIM card at step 3.
Note
• See “Mobile network (models supporting cellular transmission only)” (page 29) for information on
selecting the active SIM card slot and the preferred mobile network mode.
Installing an SD card
• When installing or removing an SD card, place the unit on a flat surface.
1. Remove the battery cover (page 13).
• If a battery is installed, remove it (page 19).
2. Slide the microSD card slot in the direction of the arrow ( ), and then open it ( ).
16 Operating Instructions - Reference Manual
Getting started
To Next Page
Loading...
