Installing and removing the battery
Make sure to turn off the unit before replacing the battery.
Installing the battery
1. Remove the battery cover (page 13).
2. Insert the tabs at the battery’s terminal side ( ) into the notches of the unit ( ), and then lower the
battery into place ( ).
For FZ-VZSUN110U
For FZ-VZSUN120
• The battery may protrude out of the unit even if you install the battery correctly. However, this is not
a malfunction or defect.
IMPORTANT
• Observe the following to ensure the waterproof and dustproof performance of the unit.
– When installing the battery, make sure there is no debris lodged in the gasket that seals the unit
and in the area around the battery.
– Make sure the gasket of the unit is not damaged, deformed, or peeled off.
18 Operating Instructions - Reference Manual
Getting started
To Next Page
Loading...
