Panasonic FZ-X1 - Charging the Battery

41Getting Started
Charging the battery
You can charge the unit by connecting it to a power outlet using an
optional AC adaptor ( page 57 ), and also by connecting it to the USB
port of a computer or other device using a USB cable.
The indicator lights in orange while the battery is charging, and lights
in green when charging is complete.
Note
• When connecting a USB cable, note the shape of the micro
USB plug and the micro USB port. Do not attempt to connect
the USB cable upside down.
• Remove any dust or water droplets from plugs before
connecting them. Do not use excessive force when inserting
plugs or insert them at an angle.
• If the installed battery fails the unit's battery authentication test,
the battery cannot be charged.
Confirming the battery level
The battery level is displayed in the upper-right corner of the screen,
in the status bar.
You can also confirm the specific amount of battery level remaining.
From the home screen, tap → [Settings] → [Battery] .
Charging the battery
Fully charged Charging Very low