65
VQT3Y48
This auto slow shutter function is only used with the 3D Conversion Lens (optional).
≥ Switch to Manual Mode. (l 73)
≥ For details, refer to [AUTO SLOW SHTR (2D)].
≥ This function’s default setting is [ON].
≥ When a 3D Conversion Lens is used, the recording scene will become darker. We
recommend setting this function to [ON].
If the unit continues to be tilted upside down from the normal horizontal position while
recording motion pictures, it is automatically put into recording pause.
≥ The AGS function may activate and cause the unit to pause the recording if you are
recording a subject right above or right below you.
Recording motion pictures with more vivid colours, using x.v.Colour
™
technology.
≥ Switch to Manual Mode. (l 73)
≥ Set [REC MODE] to [HA], [HG], [HX], [HE] or [1080/50p]. (l 60)
≥ For more realistic colours, use an HDMI mini cable (optional) with a TV that supports the
x.v.Colour
™
.
≥ When connecting this unit to a TV with the AV multi cable, the TV cannot detect the digital
cinema colour setting on this unit automatically. We recommend connecting this unit to TVs
compatible with x.v.Colour
™
using an HDMI mini cable.
≥ When viewing on the TV with the digital cinema colour function, turn off the digital cinema
colour function on the TV.
≥ When motion pictures recorded while this function is turned [ON] are played back
with a TV not compatible with x.v.Colour
™
, colours may not be reproduced properly.
≥ It is recommended to record with the setting set to [OFF] when playing back the video on
an equipment other than the ones compatible with the x.v.Colour
™
.
≥ x.v.Colour
™
is a name for devices that are compatible with the xvYCC format, an
international standard for expanded colour in motion pictures, and that follow the rules for
signal transmission.
[AUTO SLOW SHTR (3D)]
: [RECORD SETUP] # [AUTO SLOW SHTR (3D)] # [ON]
[AGS]
: [RECORD SETUP] # [AGS] # [ON]
[Digital Cinema Colour]
: [RECORD SETUP] # [Digital Cinema Colour] # [ON]
MENU
HC-V700M&V700_EB-VQT3Y48_mst.book 65 ページ ２０１１年１２月２６日 月曜日 午前９時３６分
To Next Page
Loading...
