- 153 -
To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.
≥ Depending on the Wi-Fi connection method, available Wi-Fi functions differ.
≥ If you select [History], you can set up a Wi-Fi connection that uses the connection settings of a
previously used Wi-Fi function. (l 162)
∫ About the status indicator and the connection status icon when
connected to Wi-Fi
≥ For information on how to set up a Wi-Fi connection for the Wireless Twin Camera function, refer
to page 173; for information on the connection status icons, refer to 178.
Wi-Fi
Setting Up a Wi-Fi Connection
Wi-Fi connection
methods
Connecting to a wireless access
point (l 156)
Setting up a direct connection to a
smartphone (l 160)
Available Wi-Fi
functions
≥ [Link to Cell] (l 128)
≥ [Baby Monitor] (l 131)
≥ [Home Cam] (l 134)
≥ [DLNA Play] (l 140)
≥ [Copy] (l 142)
≥ [Live Cast] (l 146)
≥ [Link to Cell] (l 127)
A Lit green
≥ The status indicator is lit green while this unit is
connected to a destination device after completing a
Wi-Fi connection.
≥ When Wi-Fi is disconnected, the status indicator is lit
red again.
B The connection status icon
When connected to wireless access point:
connected to Wi-Fi/ not connected to Wi-Fi
≥ The display will change as follows according to the
radio wave intensity: (Weak) # # #
(Strong).
When directly connected:
connected to Wi-Fi/ not connected to Wi-Fi
To Next Page
Loading...
