Panasonic HC-W570 - Setting up a Direct Connection to a Smartphone

- 160 -
Setting up a direct connection to a smartphone
Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (l 166)
≥ The default setting is [OFF].
Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi
environment.
≥ When [Direct Connection Password] is set to [OFF]
j Proceed to the following section, “Connecting with [Direct Connection Password] set to [OFF]”
≥ When [Direct Connection Password] is set to [ON]
If your smartphone is compatible with WPS, refer to “[WPS Connection]”. If not, refer to
“Connecting with QR code”.
[HC-W570PP]:
Enter SSID and Password or scan QR code to connect.
j Proceed to the following [WPS Connection]
j Proceed to the “Connecting with QR code” (l 161)
j Proceed to the “Connecting by entering an SSID and Password” (l 161)
1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2 Touch [Direct Connection].
3 On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
1 Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2 Touch [Direct Connection].
3 Touch [Change connection type].
4 Touch [WPS Connection].
5 Set the smartphone to WPS Mode.
Connecting with [Direct Connection Password] set to [OFF]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen
[WPS Connection]
Confirming that the Wi-Fi connection is complete
j The status indicator of this unit is lit green
j is displayed on the screen