- 179 -
Connecting this unit to a DLNA-compatible TV via Wi-Fi, you can play back scenes and still pictures
on the TV.
A DLNA-compatible TV
Preparations before using [DLNA Play]
1 Check if the wireless access point is compatible with IEEE802.11b/g/n.
2 Check if the TV is DLNA-compatible.
3 Set up a Wi-Fi connection between this unit and the wireless access point.
≥ [Easy Connection (WPS)] (l 194)
≥ Searching for wireless access points to set up a connection (l 195)
≥ Setting up a connection manually (l 196)
4 When the Wi-Fi connection is complete, follow the procedure in “Playing
back on a TV”. (
l 180)
≥ Using [Wi-Fi Setup Wizard], you can also set up a Wi-Fi connection in conjunction with the
smartphone application “Image App”. (l 193)
≥ [DLNA Play] is not available in the following cases:
j When [REC FORMAT] is set to [24p]
Wi-Fi
[DLNA Play]
≥ Please read the operating instructions for the TV about connecting TV to the wireless
access point.
≥ Do not remove the SD card in playing back on a TV.
To Next Page
Loading...
