Panasonic HDC-HS100 - Language Selection; Menu List

25
VQT1U19
You can select the language on the screen display and the menu screen.
1 Press the MENU button, then select [LANGUAGE] and press the cursor
button.
2 Select [English] and press the cursor button.
Recording mode
*1 It is not displayed when the AUTO/MANUAL switch is set to AUTO.
*2 It is not displayed when the intelligent auto mode is set to [ON].
*3 It will be displayed only when the [MEDIA SELECT] is set to [SD CARD].
*4 It will be displayed only when the [MEDIA SELECT] is set to [HDD].
Part of the menu will not be used depending on the used functions. ( 126)
" [BASIC]
[SCENE MODE]
*1
( 59)
[D.ZOOM] ( 44)
[GUIDE LINES]
*2
( 53)
[SET WORLD TIME] ( 30)
" [RECORD SETUP]
[FACE FRAMING] ( 50)
[REC MODE] ( 39)
[DIGITAL CINEMA]
*2
( 53)
[FADE COLOUR] ( 48)
[WIND CUT]
*1
( 60)
[MIC SETUP] ( 54)
[MIC LEVEL]
*1
( 61)
[AGS] ( 35)
[HI-SPEED BURST]
*2
( 55)
[FLASH] ( 56)
[FLASH LEVEL] ( 56)
[RED EYE] ( 56)
[SHTR SOUND] ( 56)
" [ADVANCED]
[REC LAMP]
[AUTO SLOW SHTR]
*2
( 56)
[SHOOTING GUIDE] ( 40)
[Digital Cinema Colour] ( 57)
[PICTURE ADJUST]
*1
( 62)
[MF ASSIST]
*1
( 66)
[ZEBRA]
*1
( 62)
[LUMINANCE]
*1
( 63)
[HISTOGRAM]
*1
( 64)
" [MEDIA SELECT]
Language selection
Menu list
The recording lamp lights up during recording
and flashes when the unit receives a signal
from the remote control or when the self-timer
is counting down. When this is set to [OFF], it
does not light during recording.
Media to record can be set to [HDD] or
[SD CARD].