Panasonic HDC-HS100 - Protecting Scenes and Pictures

82
VQT1U19
Editing
3
Protecting scenes/still
pictures
Scenes/still pictures can be protected so that they are not deleted by mistake.
(Even if you protect some scenes/still pictures on an SD card or HDD, formatting the SD card or
HDD will delete them.)
Rotate the mode dial to select .
1 Select the menu. ( 24)
2 Select the scene/still picture to
be protected and then press the
cursor button.
The [ ] indication appears and the scene/still
picture is protected.
! Press the cursor button again to cancel the
setting.
! 2 or more scenes/still pictures can be set in
succession.
! Press the MENU button to complete the
settings.
! When play mode is set to [INTEL. SCENE]
while playing back motion pictures, scenes
cannot be protected.
! Protection on the copied motion pictures and
still pictures will be cleared when the protected
motion pictures and protected still pictures are
copied between SD card and HDD. ( 84)
[VIDEO SETUP] or [PHOTO SETUP]
[SCENE PROTECT] [YES]