106
VQT1N87
Using with a
PC
2
If using Macintosh
≥ HD Writer 2.5E is not available for Macintosh.
∫ Operating environment for the card reader function (mass storage)
≥ Even if the system requirements mentioned in these operating instructions are fulfilled, some PCs
cannot be used.
≥ The USB equipment operates with the driver installed as standard in the OS.
≥ Supplied CD-ROM is available for Windows only.
∫ Copying still pictures on PC
1 Connect this unit to a PC via the supplied USB cable.
≥ The USB function selection screen will appear.
2 Select [PC CONNECT] and press the cursor button.
3 Double-click [NO_NAME] or [Untitled] displayed on the desktop.
≥ Files are stored in [100CDPFQ]/[100CDPFR] folder etc. in the [DCIM] folder.
4 Using a drag-and-drop operation, move the pictures you want to acquire
or the folder storing those pictures to any different folder on the PC.
∫ To disconnect USB cable safely
Drag [NO_NAME] or [Untitled] disk icon to the [Trash], and then disconnect the USB cable.
PC Macintosh
OS Mac OS X 10.4
CPU PowerPC G5 (1.8 GHz or higher)
Intel Core Duo
Intel Core Solo
RAM 64 MB or more
Interface USB port
HDCHS9EP-VQT1N87_eng.book 106 ページ ２００８年１月１１日 金曜日 午後７時５２分
To Next Page
Loading...
