14
VQT1Z27
12 Zoom buttons (l 60)
≥
These buttons function in the same manner as
the zoom lever. Changing the thumbnail display
and adjusting the volume can be operated.
13 Menu button [MENU] (l 31)
14 Delete button [ ] (l 94)
15 SD card open lever [OPEN] (l 27)
16 Audio-video output terminal [A/V]
(l 104, 119)
≥ Use the AV cable (only the supplied cable).
17 Component terminal [COMPONENT] (
l
104)
18 HDMI mini connector [HDMI] (l 104, 109)
19 Access lamp [ACCESS] (l 11, 27)
20 Card slot (l 27)
21 SD card cover (l 27)
22 Lens cover
≥ The lens cover opens in motion picture
recording mode or still picture recording
mode. (l 28)
23 Multi manual ring (l 79)
24 Speaker
25 Manual focus button [FOCUS] (l 82)
26 Manual function button [FUNCTION] (
l
83)
27 Remote control sensor (l 43)
28 Recording lamp (l 34)
29 Built-in flash (l 66)
30 Lens (LEICA DICOMAR)
31 Lens hood
Rotate the lens hood counter-clockwise A to
remove it. In order to attach it, place into slot B,
and then rotate it clockwise C.
≥ Attach the MC protector or the ND filter of the
Filter Kit (VW-LF43NE; optional) in front of the
lens hood.
≥ When fitting the tele conversion lens
(VW-T4314H; optional) or the wide conversion
lens (VW-W4307H; optional), first remove the
lens hood.
32 AF assist lamp (l 77)
22 23
24
25
26
27
28
Be careful about the following.
When 2 lens accessories, such as the ND filter
and tele conversion lens, are fitted and the
zoom lever is pressed toward the W side, the
4 corners of an image will be darkened.
(Vignetting)
(When fitting 2 lens accessories, first remove
the lens hood and then fit them.)
Attaching the lens cap
(Included in the Filter Kit
(VW-LF43NE; optional))
≥ When the filter kit (VW-LF43NE; optional) is
used, protect the lens surface while the unit
is not used with the lens cap supplied with
the filter kit.
≥ To attach or remove the lens cap, hold both
sides of the lens cap with the tips of your
finger and thumb.
HDCTM300&HS300EB-VQT1Z27_mst.book 14 ページ ２００９年１月２１日 水曜日 午後３時７分
To Next Page
Loading...
