20
VQT2H62
Preparation
Setup
3
Selecting a mode
(Turning the unit on/off)
Change the mode to recording, playback or power OFF.
Turn on the power by changing the mode to , or while pressing
the lock release button A.
The status indicator lights.
To turn off the power
Change the mode to OFF.
The status indicator goes off.
When the mode is set to or , the power can be turned on and off with the LCD monitor and
the viewfinder.
Open the LCD monitor or extend the viewfinder to turn on the unit.
≥ The power will not turn off unless the LCD monitor is closed and the viewfinder is retracted.
≥ The power will not turn off while recording motion pictures even if the LCD monitor is closed and the
viewfinder is retracted.
∫ To turn on the power
A The status indicator lights.
∫ To turn off the power
A The status indicator goes off.
Motion picture recording mode (l 39)
Still picture recording mode (l 43)
Playback mode (l 74, 81)
OFF
Turning the power on and off with the LCD monitor/viewfinder
≥ Rotate the mode dial while at the same
time pressing in the lock release button if
changing from OFF to another mode.
≥ Align with the mark B.
≥ Status indicator C.
Change the mode to OFF when this unit is not being used.
To Next Page
Loading...
