25
VQT2H62
≥ It is possible to set from the quick menu.
(l 23)
PICTURE
[PICTURE SIZE] (l 44)
[QUALITY] (l 45)
[HI-SPEED BURST]
*1
(l 66)
[SELF TIMER] (l 56)
[FLASH] (l 56)
[FLASH LEVEL]
*1
(l 56)
[RED EYE]
*1
(l 57)
[SHTR SOUND] (l 67)
MEDIA SELECT
When recording to the SD card, select [SD
CARD]. When recording to the built-in
memory, select [Built-in Memory].
SETUP
[DISPLAY]
The screen indications are selected as
shown in the illustration below.
[OFF] [ON]
[CLOCK SET] (l 28)
[SET WORLD TIME] (l 29)
[DATE/TIME] (l 28)
[DATE FORMAT] (l 28)
[ECONOMY]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns
off to save battery life.
≥ The power save function will not activate
when:
jconnected to AC adaptor
jusing the USB cable for PC, DVD
burner, printer etc.
jPRE-REC is used
[QUICK POWER ON] (l 38)
[QUICK START] (l 38)
[REMOTE CONTROL] (l 33)
[REC LAMP]
The recording lamp lights up during
recording and flashes when the unit
receives a signal from the remote control or
when the self-timer is counting down. When
this is set to [OFF], it does not light during
recording.
To Next Page
Loading...
