60
VQT2H62
Function Effect/Setting method
Digital cinema
Use this function to record an image with vivid colour, like an
image on a movie film.
≥ Change the mode to .
≥ The intelligent auto mode is set to off. (l 36)
≥ Set the recording mode to HA or HG. (l 41)
Select the menu. (l 22)
[RECORD SETUP] # [DIGITAL CINEMA] # [ON]
≥ When [DIGITAL CINEMA] is [ON], smooth viewing of the motion
pictures may not be possible.
≥ The picture will be recorded as 50i (l 97) irrespective of the
digital cinema mode setting.
Relay recording
It is possible to continuously record motion picture to an SD
card when there is no space available in the built-in memory.
≥ Change the mode to .
Select the menu. (l 22)
[RECORD SETUP] # [RELAY REC] # [ON]
≥ is displayed on the screen. will disappear when space
in the built-in memory is gone and the recording to the SD card
starts.
≥ It allows to record only to SD card from built-in memory.
≥ Relay recording can only be performed once.
≥ Combine the scenes that were relay recorded using the
[RELAY SCENE COMBINE] into the SD card. (l 92)
≥ Once the relay recorded scene and the scene that was recorded
on the SD card after that are combined into the SD card using the
[RELAY SCENE COMBINE], it will be possible to perform the
relay recording again. If the [RELAY REC] is set to [ON] without
performing the [RELAY SCENE COMBINE], a message is
displayed. You will be able to perform relay recording by touching
[YES], but you will not be able to perform the [RELAY SCENE
COMBINE] after that.
To Next Page
Loading...
