Panasonic HDC-TM60 - Before Recording; Basic Camera Positioning; Basic Motion Picture Recording

25
(ENG) VQT2M64
Basic
Recording/
Playback
2
Recording motion
pictures
1 Change the mode to .
2 Open the LCD monitor.
3 Press the recording start/stop
button to start recording.
A When you begin recording, ; changes
to ¥.
4 Press the recording start/stop
button again to pause
recording.
∫ Screen indications in the motion picture recording mode
A Recording mode
B Remaining time left for recording
(When the remaining time is less than
1 minute, [R 0h00m] flashes red.)
C Recording time elapsed
Each time the unit is put into recording
pause, the counter display will be reset
to “0h00m00s”.

0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
HG
HDCSD60&TM60&HS60EP-VQT2M64_mst.book 25 ページ ２０１０年１月１５日 金曜日 午前９時４２分
This Manual: http://www.manuallib.com/file/2591125