33
(ENG) VQT2M64
Advanced
Recording
(Advanced)
2
Optical image stabilizer
function
Optical image stabilizer can stabilize the image without decreasing the image quality as
much.
¬ Change the mode to or .
∫ Changing the optical image stabilizer function when in still picture
recording mode
[MODE1]:
The function works all the time.
[MODE2]:
The function works when the button is pressed. We recommend you are recording
yourself or recording with a tripod in still picture recording mode.
≥ When in [MODE1], / appears. When in [MODE2], / appears.
≥ Stabilization may not be possible under strong shaking conditions.
: [RECORD SETUP] # [O.I.S.] # [MODE1] or [MODE2]
Optical image stabilizer button
Pressing the button changes the optical
image stabilizer setting.
(Motion picture recording mode)
# # OFF
(Still picture recording mode)
/ # / # OFF
≥ Switch to manual mode before setting the
Optical Image Stabilizer function to off.
: Active mode
This setting gives more stabilization and is
suitable for recording when walking.
: ON
This setting is suitable for recording in a stable
state such as scenery. We recommend
recording with a tripod in motion picture
recording mode.
HDCSD60&TM60&HS60EP-VQT2M64_mst.book 33 ページ ２０１０年１月１５日 金曜日 午前９時４２分
This Manual: http://www.manuallib.com/file/2591125
To Next Page
Loading...
