Panasonic HDC-TM80 - To dub using equipment with an SD card slot; To dub using equipment with a USB terminal; Dubbing through operations on the Blu-ray disc recorder or high-definition (AVCHD) compatible DVD recorder.

105
VQT3J26
∫ To dub using equipment with an SD card slot
You can dub by directly inserting an SD card.
≥ /
To copy scenes or still pictures from the built-in
memory or HDD to an SD card, see page 95.
∫ To dub using equipment with a USB terminal
You can dub by connecting a USB cable.
≥ Use the AC adaptor to free you from worrying about the battery running down.
≥ Turn on the unit (This function is available in all modes).
A USB cable (supplied)
≥ Insert the plugs as far as they will go.
1 Connect the unit to the Blu-ray disc recorder or high-definition
(AVCHD) compatible DVD recorder.
≥ The USB function selection screen will appear on the screen of the unit.
2 Touch [RECORDER] on the screen of this unit.
≥ When you select an option other than [RECORDER], reconnect the USB cable.
≥
When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
3 /
Touch the media you wish to dub.
≥ When using the battery, the LCD monitor turns off after about 5 seconds. Touch the screen
to turn the LCD monitor on.
4 Dubbing through operations on the Blu-ray disc recorder or
high-definition (AVCHD) compatible DVD recorder.
≥ /
Do not touch [CHANGE MEDIA] on the screen of the unit during dubbing.
HDCSD80&TM80&HS80EB-VQT3J26_mst.book 105 ページ ２０１１年１月１１日 火曜日 午前１１時４４分