Panasonic HDC-TM80 - To watch images on a regular TV (4:3) or when both sides of the images do not appear on the screen; To display the on-screen information on the TV

91
VQT3J26
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the
images correctly. (Check the TV setting.)
Example of images with a [16:9] aspect
ratio on a regular TV (4:3)
≥ If a wide-screen TV is connected, adjust
the aspect setting on the TV. (Refer to the
operating instructions of the TV for
details.)
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen
(operation icon and time code etc.) can be
displayed/not displayed on the TV.
[OFF]:
Not displayed
[SIMPLE]*:
Information partially displayed
[DETAIL]:
All information displayed
* This setting is only available in recording
mode.
: [SETUP] # [TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
MENU
: [SETUP] # [EXT. DISPLAY] #
desired setting
MENU
Refer to the following support site for information about the Panasonic TVs that you
can directly insert an SD card into the SD card slot on the TV and then play it back.
http://panasonic.net/
≥ iFrame scenes cannot be played back on a TV.
≥ For details on how to play back, please read the operating instructions for the TV.
HDCSD80&TM80&HS80EB-VQT3J26_mst.book 91 ページ ２０１１年１月１１日 火曜日 午前１１時４４分