Panasonic HDC-TM80 - 5 Touch the desired item.; [BURN DISC]; [PLAY DISC]

98
VQT3J26
1 Connect the AC adaptor (supplied with DVD burner) to the DVD
burner.
≥ You cannot supply power to the DVD burner from this unit.
2 Connect this unit to the AC adaptor and change the mode to .
3 Connect this unit to the DVD burner with the USB connection cable
(supplied with DVD burner).
A USB connection cable (supplied with DVD burner)
B DVD burner (optional)
≥ Insert the plugs as far as they will go.
4 Insert the disc in the DVD burner.
≥ Insert the DVD disc with the recording side down when using the DVD burner.
5 Touch the desired item.
[BURN DISC]:
Refer to page 99 for how to copy discs.
[PLAY DISC]:
Refer to page 102 for how to play back the copied discs.
To terminate the connection with the DVD burner
Touch [EXIT].
≥ Disconnect the USB connection cable from this unit.
HDCSD80&TM80&HS80EB-VQT3J26_mst.book 98 ページ ２０１１年１月１１日 火曜日 午前１１時４４分