Image screen [Image/Audio]
IP video settings screen [Video over IP]
The JPEG image and H.264 image settings as well as the settings
related to image quality are selected on this screen.
<NOTE>
• IP control can be performed but if you do not want to perform IP image
transmission, set [JPEG transmission], [H.264 transmission], [H.265
transmission], [RTMP transmission], [SRT transmission] and [Ts
transmission] to [Off].
• If JPEG image transmission is set to [Off], IP images cannot be
displayed in browsers other than Microsoft Edge (IE mode). This
includes mobile terminals.
• During IP video transmission, disconnecting the network cable
connected to this unit or changing the network settings may cause the
transmission to stop.
z Setting status
Streaming mode
The streaming mode setting is displayed.
Initial display setting
The setting for the image displayed when the live screen [Live] is
open.
JPEG
The JPEG transmission settings are displayed.
H.264
The H.264 transmission settings are displayed.
These are not displayed when [Streaming mode] is [H.265],
[H.265(UHD)], [SRT(H.265)] or [SRT(H.265 UHD)].
H.265
The H.265 transmission settings are displayed.
These are displayed when [Streaming mode] is [H.265],
[H.265(UHD)], [SRT(H.265)] or [SRT(H.265 UHD)].
z Streaming mode
It is possible to perform IP transmission operations suited to the
application by switching the [Streaming mode] on this unit.
The setting is confirmed with the [Set] button.
Mode [H.264(UHD), H.264, H.265(UHD), H.265, JPEG(UHD),
RTMP, RTMP(UHD), SRT(H.264), SRT(H.264 UHD),
SRT(H.265), SRT(H.265 UHD), NDI|HX V2, NDI|HX V2(UHD),
MPEG2‑TS over UDP, High bandwidth NDI]
H.264(UHD) IP videos can be transmitted over multiple channels.
4K images are transmitted via IP in the H.264 format.
• 4K images in H.264 format cannot be displayed in
the live screen [Live] of the unit.
Use external devices and software compatible with
4K images to display 4K images.
H.264 IP videos can be transmitted over multiple channels.
Full HD images are transmitted via IP in the H.264
format.
H.265(UHD) IP videos can be transmitted over multiple channels.
4K images are transmitted via IP in the H.265 format.
• 4K images in H.265 format cannot be displayed in
the live screen [Live] of the unit.
Use external devices and software compatible with
4K images to display 4K images.
H.265 IP videos can be transmitted over multiple channels.
Full HD images are transmitted via IP in the H.265
format.
JPEG(UHD) IP videos can be transmitted over multiple channels.
4K images are transmitted via IP in the JPEG format.
RTMP Full HD images are transmitted via IP in the H.264
format to the RTMP/RTMPS server.
RTMP(UHD) 4K images are transmitted via IP in the H.264 format
to the RTMP/RTMPS server.
SRT(H.264) Full HD images are transmitted via IP in the H.264
format to the SRT compatible decoder or service.
SRT(H.264
UHD)
4K images are transmitted via IP in the H.264 format
to the SRT compatible decoder or service.
SRT(H.265) Full HD images are transmitted via IP in the H.265
format to the SRT compatible decoder or service.
SRT(H.265
UHD)
4K images are transmitted via IP in the H.265 format
to the SRT compatible decoder or service.
NDI|HX V2/
NDI|HX V2(UHD)
Videos are sent to software applications and
hardware compatible with NewTek NDI|HX over a
network.
MPEG2-TS over
UDP
IP videos can be transmitted over multiple channels.
Full HD images are transmitted via IP in the H.264
format.
High bandwidth
NDI
Videos are sent to software applications and
hardware compatible with NewTek High Bandwidth
NDI over a network.
Factory settings: H.264
<NOTE>
• When [IP(UDP)] of [Tracking Data Output] is set to [On], video
transmission via IP may be delayed or the video may suffer frame
loss. (→ page 165)
We recommend setting [IP(UDP)] of [Tracking Data Output] to [Off]
to avoid the delay or frame loss due to the video transmission via IP.
125
Web screen configurations (continued)
To Next Page
Loading...
