Paint settings screen [Paint]
Adjust the image quality.
The settings in this screen (with the exception of [Scene] and [Matrix])
are applied immediately. After selecting the settings for [Scene] and
[Matrix], you need to press the [Set] button to execute.
SCENE [Scene1 to Scene8]
USER [User1 to User3]
Switch the shooting mode depending on the shooting environment.
Select a shooting mode based on the shooting conditions or
preference.
Select a shooting mode from the pull-down menu, and click the [SET]
button to switch to the selected mode.
Scene1 to Scene8,
User1 to User3
Modes that allow you to adjust detailed settings
manually for various shooting conditions and
preferences.
Camera control/Setup Menu button
You can display the camera control screen by clicking the [Camera
control] button.
You can control the camera while adjusting the image quality.
z BRIGHTNESS
142
Web screen configurations (continued)
To Next Page
Loading...
