Panasonic HEVC Advance AW-UE160WP - Network


Changing the format
When the currently selected format is changed in [FORMAT], the pre-
format-change confirmation screen appears.
Pre‑format‑change confirmation screen
FORMAT
Do you want to set
Format(1080/23.98p)?
CANCEL
O.K.
• The format to be set is displayed within the parentheses on the
screen.
• When you move the cursor to [O.K.] on the pre-format-change
confirmation screen and confirm, the post-format-change
confirmation screen appears.
Post‑format‑change confirmation screen
FORMAT
Are you O.K.?
No
Yes
• When confirmed with the cursor on [Yes], the screen returns to the
[FORMAT] selection screen in the post-format-change format.
• When confirmed with the cursor on [No], the screen returns to the
[FORMAT] selection screen after changing back to the pre-format-
change format.
The same occurs if an operation is not performed within 30 seconds.
• When Format is changed, IP video transmission is stopped.
• When Format is changed, the Format for each output terminal
(12G SDI OUT, 3G SDI OUT, HDMI) is reset to its predefined value.
NETWORK
LAN
Make a variety of settings related to the LAN connector.
DHCP [OFF, ON]
Set DHCP OFF/ON.
IP ADDRESS
Set the IP address for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
SUBNET MASK
Set the subnet mask for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
DEFAULT GATEWAY
Set the default gateway for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
MAC ADDRESS
The MAC address of this unit is displayed.
SFP+
Make a variety of settings related to the SFP+ connector.
<NOTE>
• This cannot be set when the [BASIC CONFIG] – [SFP+ MODE] is
[12G OUTPUT].
DHCP [OFF, ON]
Set DHCP OFF/ON.
IP ADDRESS
Set the IP address for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
SUBNET MASK
Set the subnet mask for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
DEFAULT GATEWAY
Set the default gateway for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
MAC ADDRESS
The MAC address of this unit is displayed.
USB
Make a variety of settings related to the USB connector.
DHCP [OFF, ON]
Set DHCP OFF/ON.
IP ADDRESS
Set the IP address for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
SUBNET MASK
Set the subnet mask for this unit.
The set value is applied to this unit when [SET EXECUTE] is
executed.
51
Camera menu items (continued)