EasyManua.ls Logo

Panasonic HX-DC2 - Charging and Recording Time

Panasonic HX-DC2
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 VQT4D20
1 Connect the USB cable to the AC adaptor.
Check that the plug portion of the AC adaptor is not loose or
misaligned.
2 Plug the AC adaptor into the AC outlet.
3 Connect the USB cable to the unit.
The status indicator flashes red with a period of approximately
2 seconds (approximately 1 second on, 1 second off), and charging
begins. It will turn off when the charging is completed.
Do not use any other AC adaptors except the supplied one.
Do not use any other USB cables except the supplied one.
We recommend using Panasonic batteries (l 9, 10).
If you use other batteries, we cannot guarantee the quality of this
product.
Do not heat or expose to flame.
Do not leave the battery(ies) in a car exposed to direct sunlight for a
long period of time with doors and windows closed.
Charging and recording time
Charging/Recording time
Temperature: 25 oC/humidity: 60%RH (When using AC adaptor)
These times are approximations.
Battery model
number
[Voltage/Capacity
(minimum)]
Charging
time
Recording
mode
Maximum
continuously
recordable
time
Actual
recordable
time
Supplied battery/
VW-VBX070
(optional)
[3.7 V/700 mAh]
2h
50 min 30 min
55 min 35 min
50 min 30 min
1h5min 35min
1h25min 45min
1h5min 40min
1h30min s
Simplified-HX-DC2EG-VQT4D20_mst.book 14 ページ 2012年1月5日 木曜日 午前11時51分

Other manuals for Panasonic HX-DC2

Related product manuals