3.3 Customising Your System (System Programming)
198 User Manual
Procedure
The basic steps are shown below.
1. Entering the programming mode
2. Programming
You can enter each programme number (3 digits).
3. Exiting the mode
• To exit the programming mode at any time, lift the handset.
• To exit the programming mode at any time, lift the handset.
Enter
system password
.Enter .
system password
Press
PROGRAM
or
PAUSE
.
OR
PROGRAM
PAUSE
Press
PROGRAM
or
PAUSE
.
PROGRAM
PAUSE
OR
To Next Page
Loading...
