Panasonic Hybrid IP-PBX KX-TDA30 - Page 197

4.2 Feature Number Table
User Manual 197
1.7.11 Setting the Parallelled Telephone to
Ring (Parallelled Telephone)
39
()
– Ring 1
– No Ring 0
1.7.12 Using Your PS in Parallel with a
Wired Telephone (Wireless XDP Parallel
Mode)
48
()
– To set 1 + paired wired extension no.
– To cancel 0
1.7.13 Clearing Features Set at Your
Extension (Extension Feature Clear)
790
()
1.8.1 Leaving an Incoming Call Distribution
Group (Log-in/Log-out, Wrap-up)
Log-in
736
()
1 + ICD Group extension no./
Log-out
0 + ICD Group extension no./
To enter/leave the Not Ready mode
735
()
1 (Not Ready)/0 (Ready)
*
3
1.8.2 Monitoring and Controlling the Call
Status of an Incoming Call Distribution
Group (Incoming Call Distribution Group
Monitor)
739
()
ICD Group extension no.
1.9.1 If a Doorphone/Door Opener is
Connected
Doorphone Call
31
()
doorphone no. (2 digits)
Opening a Door (Door Open)
55
()
doorphone no. (2 digits)
1.9.2 If an External Relay is Connected
56
()
relay no. (2 digits)
1.9.4 If a Host PBX is Connected
Accessing External Services (External
Feature Access [EFA])
60
()
service code
1.9.5 If a Voice Processing System is
Connected
Call Forwarding to Voice Mail (Voice Mail
Integration)
– Both Calls
710
()
0 (Cancel)/
Feature (While dial tone is heard)
Default
(New)
Additional digits/buttons