4.3 Registering the IP Proprietary Telephone
Information about IP Proprietary Telephones 33
4.3 Registering the IP Proprietary Telephone
4.3.1 Registering the IP-PT
After programming of both the IP-EXT16 card and IP-PT is finished, the IP-PT must be registered to the
Hybrid IP-PBX. This is done by using the KX-TDA Maintenance Console.
Registration
While the registration is executing, it is possible to abort registration by clicking Halt in step 2 above.
However, if the registration is already completed, the registration cannot be aborted and the dialog box will
show "Registration Halt: NG". Click Continue and confirm the progress of registration.
1.
a. Double-click Configuration.
b. Double-click IP-Extension Port.
c. Select the IP-PT by clicking the Select cell, and set it
to ON.
More than one IP-PT can be selected at a time (only
unregistered IP-PTs with an extension number can be
selected).
d. Click Registration.
2. Click Confirm.
• If the registration is still in process, the dialog box will
show "Waiting: IP-PT Registration". Click Close.
• If the registration is successful, the dialog box will
show "Registration Succeed". If there are more IP-
PTs to be registered, click Continue to resume or
Quit to terminate the registration. If not, click Close.
Once the IP-PT is successfully registered, the status of the
IP-PT will update to show "Registered".
To Next Page
Loading...
